Front Brake Pad - ACDelco (14D1328MHF1)
Genuine OEM ACDelco Parts & Accessories - 14d1328mhf1
No image available
Genuine ACDelco Parts 
- ACDelco
- 14D1328MHF1
Details
- Brand:
- SKU:
14D1328MHF1
- GTIN: 00193468101980
- UPC: 193468101980
- Positions: Front
- Other Names:
19423400
- Description: ACDelco Silver (Advantage) Semi-Metallic Disc Brake Pads are a quality, high value alternative for General Motors vehicles as well as most makes and models and are backed by General Motors. These disc brake pads are formulated with steel strands to provide strength and conduct heat away from the rotor's surface while offering quality braking power. Also, hardware clip kits are included where applicable. ACDelco Advantage Semi-Metallic Disc Brake Pads are available for all makes and models. ACDelco Silver (Advantage) parts are a good choice for many vehicles on the road today. Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
disc-brake-pad-set;disc-brake-pads;brake-pads;brake-pad-set;disc-brake; - Condition: New
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Vehicle Fitment
Select Your Vehicle
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Also Purchased
Additional Information
| Brand | ACDelco Silver |
| Abutment Clips Included | Yes |
| Backing Material | Steel |
| Chamfered Edges | Yes |
| FAQ - Answer 1 | No, but it is a good idea to inspect them for wear-out, cracking, leaking, etc. |
| FAQ - Answer 2 | Yes, ACDelco also offers GM OE Brake Pads and Professional Brake Pads. |
| FAQ - Answer 3 | No, but it is a good idea to inspect your brake pads at each tire rotation. |
| FAQ - Question 1 | Do I have to replace all my brake parts when replacing my brake pads? |
| FAQ - Question 2 | Does ACDelco offer other grades of brake pads? |
| FAQ - Question 3 | Do I have to replace my brake pads after a certain amount of time? |
| FMSI Number | D1328-8440 |
| Features & Benefits - Bullet 1 | Ceramic, Semi-Metallic, and Organic formulas provide safety and reliability for a range of vehicle applications |
| Features & Benefits - Bullet 2 | Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness |
| Features & Benefits - Bullet 3 | No curing or machining required, ready to be installed right out of the box |
| Features & Benefits - Bullet 4 | Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage |
| Features & Benefits - Bullet 5 | Economical value with dependable quality |
| Features & Benefits - Bullet 6 | For General Motors vehicles as well as most makes and models |
| Friction Material Attachment | Bonded |
| Friction Material Composition | Metallic |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Height (in) | 4 |
| Inner Pad Friction Material Thickness | 6.604 |
| Inner Pad Friction Material Thickness (in) | 0.26 |
| Inner Pad Height | 2.760 |
| Inner Pad Overall Thickness | 0.725 |
| Inner Pad Width | 8.440 |
| Length (in) | 11.5 |
| Outer Pad Friction Material Thickness | 0.26 6.604 |
| Outer Pad Height | 2.760 |
| Outer Pad Overall Thickness | 0.725 |
| Outer Pad Width | 8.440 |
| Pad Shims Included | Yes |
| Pad Wear Sensor Included | No |
| Pad Wear Sensor Type | Mechanical |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Vehicle pulls to the left or right when brakes are applied. |
| Slotted | Yes |
| Weight (lb) | 8.54 |
| Width (in) | 6.25 |
Product Reviews
Dealer Auto Parts
Discover top-quality Ford and Motorcraft auto parts at Dealer Auto Parts – your one-stop destination for genuine automotive excellence. Explore a vast inventory of premium replacement parts designed to keep your vehicle running smoothly. Shop with confidence, knowing you're getting authentic products at competitive prices. Elevate the driving experience of your 2008-2023 Ford vehicle with your Front Brake Pad (14d1328mhf1) and our expertly curated selection. Enjoy swift shipping and unparalleled customer service. Trust Dealer Auto Parts for all your automotive needs – where quality meets performance, and your satisfaction is our priority!
Shop more parts by selecting your model below: